The psaltery is an ancient instrument that so many musicians have played since the dawn of ages. If one does not know what these instruments are, basically, they are string instruments that look somewhat like harps and violins combined together. If one loves playing exotic instruments, then he can actually make one of these handmade psalteries at home.
Now the very first thing to do in this entire process would be to create the frame. Now the frame has to be done carefully because if it is not done well, then the whole instrument may actually fall apart. To make the frame, one must cut out three blocks of plywood with two being tall and thin while the third one is smaller and thick.
Once one has already gotten the three pieces of wood, then the next step would be to glue them together. Of course one has to make use of a special glue that is able to glue the pieces of wood together. Once he has done that, then he has to just wait for the glue to dry then he can go to the next step.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Now once the pins have been put into place, the next thing to do would be to add the strings. Now the strings can be bought at a music store anywhere in the country. To attach the strings, one must tie the strings to the pins with the help of some pliers.
After doing that, then the last thing that one has to do would be to attach the bridge. Now the bridge is a very important part of the entire psaltery because it is what will make the strings sound really good. It should be located on the pins that are on the bottom of the instrument. Once that is already done, then one now has a psaltery which he can start plucking and strumming away. He may also want to build a bow along with it but that is already a different story.
Now the very first thing to do in this entire process would be to create the frame. Now the frame has to be done carefully because if it is not done well, then the whole instrument may actually fall apart. To make the frame, one must cut out three blocks of plywood with two being tall and thin while the third one is smaller and thick.
Once one has already gotten the three pieces of wood, then the next step would be to glue them together. Of course one has to make use of a special glue that is able to glue the pieces of wood together. Once he has done that, then he has to just wait for the glue to dry then he can go to the next step.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Now once the pins have been put into place, the next thing to do would be to add the strings. Now the strings can be bought at a music store anywhere in the country. To attach the strings, one must tie the strings to the pins with the help of some pliers.
After doing that, then the last thing that one has to do would be to attach the bridge. Now the bridge is a very important part of the entire psaltery because it is what will make the strings sound really good. It should be located on the pins that are on the bottom of the instrument. Once that is already done, then one now has a psaltery which he can start plucking and strumming away. He may also want to build a bow along with it but that is already a different story.
About the Author:
When you are looking for information about handmade psalteries, you can pay a visit to the web pages online here today. Details are available at http://www.davespsaltery.com now.
No comments:
Post a Comment