9/22/2013

Techniques In Exterior Painting Smyrna GA

By Dawn Williams


A good exterior painting would extend the lifespan of walls as well as increase the value of the house or home. Repainting or replacing the old paint with a new one gives the house a new outlook and keeps it neat. Being a procedural task, special attention should be paid towards the specific steps involved in applying paint to the house. The following are some of the best techniques for performing a quick and thorough exterior painting Smyrna GA experts advise on.

The first step involved in painting is choosing relevant equipments and resources for the job. Proper planning means that the project owner should make swift moves towards making minimum investments of the materials. Adequate preparations also include making a proper budget for all the pending costs of the entire project. All tools and materials to be used for the project should be put in [place before any task commences.

At least two quality synthetic-bristle paint brushes are required for the general painting job. One 4-in brush with straight bristles would be used to paint large areas, while a 1-1/2-in brush with sash angles is used for detailed paint work. A roller setup is used for applying paints to large parts of shingles, brick or stucco. Standard 9-in rollers are suited for large flat areas, while the 7-in are used for the siding and narrow parts of the house.

The painter should be careful not to waste much paint while loading the brush. The brush is loaded by dipping about 2 inches of the bristles into the paint. It is then slapped back and forth against the side of the can to reduce the excess paint. This requires using just 2 or 3 inches of paint instead of a full can.

Quality paint is restored by ensuring that colors used conform to the architectural requirements of the building. The property owner can often seek the intervention of professional painters and contractors to assist them in choosing appropriate colors. First, the painter should test the entire color scheme on a small part before applying the whole paint. A rough measurement of the exterior building should be made in order to determine adequate amount of paint for use.

In case of using a roller, a roller screen is hanged into the bucket with paint for loading. Once loaded, it is rolled on the screen until the entire roller nap absorbs enough paint. The roller screen serves to avoid wastage of excess paint absorbed by the roller.

Exterior paint work is adversely affected by the weather conditions and that should be put into considerations. The painter should avoid direct sunlight because the heat dries up the paint. Similarly, wind should be avoided because it equally dries up the paint too fast. In case of a latex paint, then the job should not be done at a temperature lower than 50 degrees F.

The painter is required to improvise practical measures of avoiding some of the common errors that may affect the quality of exterior painting. For instance, he should ensure that the painted surface is not affected by the lap marks. This requires quick addition of paint as soon as the previous is applied. Brush marks can be avoided through making new paint strokes on unfinished regions of the wall. If looking for contractors in exterior painting Smyrna GA dwellers can conduct the search over the Web.




About the Author:



No comments:

Post a Comment