Nothing is quite as effective as an impressive lighting display when in a nightclub on concert hall. In the past this was limited to basic colored light but in recent years moving head lights have become a more popular choice. These units offer more flexibility and can create some fantastic effects when fitted.
Many variations of moving units are now offered for sale with many colors and patterns to choose from. This lighting can be used as a stand alone controlled only by sound but the majority of them will be connected to a DMX box to enable them to be remotely operated. After connecting them to the box they can be pre programmed into sequences or operated by a technician.
When choosing disco lighting it is important to take some time to think about what the lights will do and where to fit them. From single lights to rigs with multiple units attached the effects can be stunning. Also with the addition of a gobo lens customized patterns, bar insignia and writing can be projected onto any wall, ceiling or floor.
Costs vary considerably depending on the type and size of unit, materials used in the casing and manufacturer. A one beam plastic cased head can cost as little as a few hundred dollars and is ready use as soon as it is unpacked. When connected to the programmable box which will start at around 120 dollars more options are available to the user.
At the higher end of the scale the more professional units start at around 2000 dollars and the control unit for these will be approximately 500. Also on top of this special connectors and cable will need to be purchased by the meter depending on how far it has to be run. This cable can be fairly expensive and it is important to factor this into the final cost.
Another place to source these set ups The safest way to buy lighting such as this is by visiting a professional store or outlet that specializes in stage equipment. Most of these retailers will stock a large selection of lighting and accessories and will be happy to help with advice and tips. The other benefit of using a reputable store is that if any problems arise afterwards they will be on hand to help fix them.
is by looking at second hand lights and cables. This way of buying can save hundreds if not thousands of dollars but when using used equipment it should always be tested by an engineer prior to installation. Many internet sites and auction pages will have light units listed for sale from as little as a few dollars per item.
After purchasing and deciding where to install the lights it is advisable to always use the services of an expert. Due to the complexity of wiring some of these units and the time it can take it is better to use a qualified technician. It is also very important after fitting to have the lighting inspected and serviced from time to time to ensure that it operated efficiently.
Many variations of moving units are now offered for sale with many colors and patterns to choose from. This lighting can be used as a stand alone controlled only by sound but the majority of them will be connected to a DMX box to enable them to be remotely operated. After connecting them to the box they can be pre programmed into sequences or operated by a technician.
When choosing disco lighting it is important to take some time to think about what the lights will do and where to fit them. From single lights to rigs with multiple units attached the effects can be stunning. Also with the addition of a gobo lens customized patterns, bar insignia and writing can be projected onto any wall, ceiling or floor.
Costs vary considerably depending on the type and size of unit, materials used in the casing and manufacturer. A one beam plastic cased head can cost as little as a few hundred dollars and is ready use as soon as it is unpacked. When connected to the programmable box which will start at around 120 dollars more options are available to the user.
At the higher end of the scale the more professional units start at around 2000 dollars and the control unit for these will be approximately 500. Also on top of this special connectors and cable will need to be purchased by the meter depending on how far it has to be run. This cable can be fairly expensive and it is important to factor this into the final cost.
Another place to source these set ups The safest way to buy lighting such as this is by visiting a professional store or outlet that specializes in stage equipment. Most of these retailers will stock a large selection of lighting and accessories and will be happy to help with advice and tips. The other benefit of using a reputable store is that if any problems arise afterwards they will be on hand to help fix them.
is by looking at second hand lights and cables. This way of buying can save hundreds if not thousands of dollars but when using used equipment it should always be tested by an engineer prior to installation. Many internet sites and auction pages will have light units listed for sale from as little as a few dollars per item.
After purchasing and deciding where to install the lights it is advisable to always use the services of an expert. Due to the complexity of wiring some of these units and the time it can take it is better to use a qualified technician. It is also very important after fitting to have the lighting inspected and serviced from time to time to ensure that it operated efficiently.
About the Author:
Find an overview of the benefits you get when you purchase head lights online and view our selection of moving head lights at http://www.stagelasers.com right now.
No comments:
Post a Comment