In part one of my article about drumheads, I shared details about the number of plies in drumheads and how they affect their durability and sound. This week, I'll cover 3 additional elements of drumheads: muffling, coatings, and bottom heads.
Pre-Muffled or Wide-Open Drumheads
Heads now exist with built-in muffling to eliminate unwanted overtones, which is achieved is by applying a ring of material like Mylar to the drumhead's top or underside. Evans, a leading supplier of drumheads, offers a model with tiny-sized holes or vents along the perimeter that get rid of overtones by moving air through the membrane. Evans also offers a unique drumhead that utilizes a thin layer of oil between the two plies of their Hydraulic series to achieve a muffled tone.
Keep in mind that these pre-muffled drumheads don t change the pitch of the drum when it's tuned: they only remove unwanted additional frequencies. Pre-muffled drumheads can also help to remove the need for other means of muffling, like gaffer tape.
Clear or Coated Drumheads
Coated drumheads are spray-painted clear heads. While clear drumheads have more sustain than coated heads, coated drumheads have a sharper attack that accentuates the sound of the stick striking the drumhead surface (this is the primary reason why drummers traditionally use a coated head on their snare drum).
If you're playing with brushes, you definitely need to use a coated head for brush response. A coated drumhead also has a more dampened sound than a clear drumhead - which makes sense since a coated drumhead has an extra layer of materiel applied to its surface.
Resonant or Bottom/Front Head
You get your pitch from the top or batter head and your sustain from the bottom head, so you'd usually only use a single-ply drumhead on the bottom of your tom and snare and on the front of your bass drum.
Snare drum resonant heads are specifically created for the bottom side of your snare. They're ultra-thin and not meant to be struck. This thinness helps to increase vibration and sensitivity to your snare wires.
(FYI, never install a single-ply batter head on the bottom of your snare drum - unless you want it to sound like a choked cardboard box!)
Have questions about drumheads? Feel free to reach out. I'm always here to help!
Pre-Muffled or Wide-Open Drumheads
Heads now exist with built-in muffling to eliminate unwanted overtones, which is achieved is by applying a ring of material like Mylar to the drumhead's top or underside. Evans, a leading supplier of drumheads, offers a model with tiny-sized holes or vents along the perimeter that get rid of overtones by moving air through the membrane. Evans also offers a unique drumhead that utilizes a thin layer of oil between the two plies of their Hydraulic series to achieve a muffled tone.
Keep in mind that these pre-muffled drumheads don t change the pitch of the drum when it's tuned: they only remove unwanted additional frequencies. Pre-muffled drumheads can also help to remove the need for other means of muffling, like gaffer tape.
Clear or Coated Drumheads
Coated drumheads are spray-painted clear heads. While clear drumheads have more sustain than coated heads, coated drumheads have a sharper attack that accentuates the sound of the stick striking the drumhead surface (this is the primary reason why drummers traditionally use a coated head on their snare drum).
If you're playing with brushes, you definitely need to use a coated head for brush response. A coated drumhead also has a more dampened sound than a clear drumhead - which makes sense since a coated drumhead has an extra layer of materiel applied to its surface.
Resonant or Bottom/Front Head
You get your pitch from the top or batter head and your sustain from the bottom head, so you'd usually only use a single-ply drumhead on the bottom of your tom and snare and on the front of your bass drum.
Snare drum resonant heads are specifically created for the bottom side of your snare. They're ultra-thin and not meant to be struck. This thinness helps to increase vibration and sensitivity to your snare wires.
(FYI, never install a single-ply batter head on the bottom of your snare drum - unless you want it to sound like a choked cardboard box!)
Have questions about drumheads? Feel free to reach out. I'm always here to help!
About the Author:
Vic Salazar is the owner of Vic's Drum Shop, an
internationally renowned drum and percussion retailer in Chicago, IL. The vast knowledge of drum gear that he's
accumulated over his 40 year career has made Vic a valuable resource for
beginning drummers, drumming hobbyists, professional drummers, and many of the
world's premier drum superstars.
internationally renowned drum and percussion retailer in Chicago, IL. The vast knowledge of drum gear that he's
accumulated over his 40 year career has made Vic a valuable resource for
beginning drummers, drumming hobbyists, professional drummers, and many of the
world's premier drum superstars.
No comments:
Post a Comment