A camera - is a device with high accuracy, which combines elements of digital electronics, precision mechanics and complex optics.
If you use it properly, comply with the manual instruction that came with your camera and protect it from mechanical damage and contamination, it can work for many years without repair.
It is necessary to keep the camera in a hard case that protects it from both dust and dirt, and from mechanical forces.
When sharp blows, falls or other mechanical actions some of the components and parts in the camera may be damaged - in the first place, the objective and the display (LCD).
Dust and sands, which penetrate into the camera, cause premature wear of the rubbing surfaces of the lens zoom mechanism. Tiny grains of sand, falling on the gear teeth of focal-plane shutter and diaphragm, focus and zoom motors, often lead to fastening of the objective-glass, and often derange the photo camera.
The camera cannot be kept in a damp location, as the moisture causes corrosion of metal parts, printed conductors and electronic components, resulting in damage of optics and antireflection coating of optical lenses.
It is not advised to apply the camera in a bad weather. If drops of water accidentally hit the camera, you have to delete them immediately after photography.
Don't expose the device sharp fluctuations of temperature. In winter, when the camera is brought from the street into a warm room, moisture is condensed on the surface. Therefore, you should not open the pouch and remove the camera as long as it does not warm up to room temperature.
When the camera got into the water, especially in the marine, you must immediately remove the batteries and dry. After that you have to go to a specialized camera workshop for cleaning circuit boards and other nodes of the camera with special solutions in order to prevent further corrosion.
If you use it properly, comply with the manual instruction that came with your camera and protect it from mechanical damage and contamination, it can work for many years without repair.
It is necessary to keep the camera in a hard case that protects it from both dust and dirt, and from mechanical forces.
When sharp blows, falls or other mechanical actions some of the components and parts in the camera may be damaged - in the first place, the objective and the display (LCD).
Dust and sands, which penetrate into the camera, cause premature wear of the rubbing surfaces of the lens zoom mechanism. Tiny grains of sand, falling on the gear teeth of focal-plane shutter and diaphragm, focus and zoom motors, often lead to fastening of the objective-glass, and often derange the photo camera.
The camera cannot be kept in a damp location, as the moisture causes corrosion of metal parts, printed conductors and electronic components, resulting in damage of optics and antireflection coating of optical lenses.
It is not advised to apply the camera in a bad weather. If drops of water accidentally hit the camera, you have to delete them immediately after photography.
Don't expose the device sharp fluctuations of temperature. In winter, when the camera is brought from the street into a warm room, moisture is condensed on the surface. Therefore, you should not open the pouch and remove the camera as long as it does not warm up to room temperature.
When the camera got into the water, especially in the marine, you must immediately remove the batteries and dry. After that you have to go to a specialized camera workshop for cleaning circuit boards and other nodes of the camera with special solutions in order to prevent further corrosion.
About the Author:
Olympus XZ-1 review will help you to make a wise choice. Without this Olympus XZ-1 review you can make a mistake.
No comments:
Post a Comment